Minimalistic hook
signal27dock
AI找相似
打印配置(0)
模型文件(0)
0
0
0
发布时间:2026-03-02 07:38:14
0
0
000描述
标签
模型来源
评论(0)
- Material: PETG
- Infill: 50%, Grid pattern (stable and distributes load evenly)
- Wall Thickness / Perimeters: 4–5 walls (1.6–2.0 mm)
- Top Layers: 6
- Bottom Layers: 5
- Holes: Perimeters only + at least 4 perimeters so there’s solid material around the screw hole
- Layer Height: 0.2 mm for good strength and detail
- Print Temperature: 240–250 °C (depending on PETG brand)
- Bed Temperature: 80 °C
- Cooling: 40–50% fan speed (higher = more detail, lower = better layer adhesion)
- Brim: 3–5 mm if the part is small to prevent warping
标签
模型来源
原设计地址: 点击查看
CC BY