Modified version of Mini Satana
BriskYak98
AI找相似
打印配置(0)
模型文件(0)
0
0
0
发布时间:2024-12-26 16:44:08
0
0
000描述
模型来源
评论(0)
该内容已自动翻译。 显示原文
Abstract
This is a mini Saturna modification that is compatible with the original CR Touch mounting bracket and the Creality direct drive kit. As shown in the above picture, it is recommended that you remove the two screws of the hot end fan and use them to install the modified version in place.
Please also check out my other models.
Print settings
Printing brand:
Creality
Raft layer:
I don't care
Resolution:
0.2 or 0.3
Consumables:Overture PLA
White note: It may be a bit difficult to install the CR Touch using the two screws of the hot end fan, but it is possible. You can also use this fan cover without the CR Touch or direct drive.
模型来源
原设计地址: 点击查看
CC0