jocker hueforge

3D Print Instructions

---------------------

Layer height: 0.020 mm

First layer height: 2.000 mm

Recommended: Layer loops: 1; Infill: 100%

Start with color: #272727

Color swap plan:

1. Start with #272727

2. Swap to #a7a7a7 at layer 1 (~2.000 mm)

3. Swap to #d9d9d7 at layer 11 (~2.180 mm)

Notes: Heights are approximate. Confirm in slicer before printing.

---------------------

Made by rezzad