Quick CPAP Backpack for E3NG users who are using CPAP. Made sure to include the .step file for anyone who would like to remix in any way. I attempted to make a silencer but all it really seems to do is restrict airflow.... Could be useful for people that need to cool parts that require some cooling but cannot have part cooling fans OFF. It slots inside the "Intake Flange"

Recommended settings:
3 walls, 4 or 5 top & bottom layers (Except for "Restrictor Pill" that should be printed with NO Top or bottom layers), 20-30% infill your choice make sure to use gyroid infill on boost pill or it will be a plug, ASA/ABS plastic, I tried to make it so there is no need for supports, but the charge pipe may need one.

Supplies needed:
16 x M3 heat inserts
10x M3x6 Socket Head Cap Screws
10x M3x16 SHCS
8x M3x12 SHCS
4x M3 T-Nuts
1x WS7040
1x Driver
1x The extra board that has 3 WAGO connectors BTT gives you with their "Turbo Kit" If you have it
Spare Wire, 6 Ferrules, 6p & 3p 2.54mm JST-XH MALE plugs, CPAP hosing.

The idea behind this backpack is as follows:
Actually have somewhere to put the WS7040 for CPAP, Sadly E3NG does not have a stock option.
Just like with the E3NG Keep maintenance and repair easy and straight forward.
Make sure the filter does not get in the way of the toolhead at any point.
Ability to stuff sound dampening around WS7040 so its not so dang loud.
Keep all electronics within the backpack so there is only 4 wires coming out of it.
Have several mounting places so the backpack does not create weird resonances.
Keep everything as "Tidy" looking as possible.

Please keep in mind right now this mod only works with the enclosure. it REQUIRES that you drill holes through your enclosure. I intend on getting a setup for people that are not using enclosure but I'd just like to make sure "V1" Is perfect before I add the "Direct to 2020" Mounts & Baseplate.

If you notice anything the best place to report it is on the Discords mod post.
Happy printing!

Updates:

4-1-26: Stopped being lazy and fixed rear hinge collision. Need to make enclosure-less mount next. Happy printing!