Small case for wt32-eth01 with a usb c port for charging. I use the module for BTproxy with esphome and just need power to it. 

Used these from Temu https://www.temu.com/goods.html?_bg_fs=1&goods_id=601099518545540&_x_sessn_id=846g7msbit&refer_page_name=bgt_order_detail&refer_page_id=10045_1701609953420_o2uc19fsrj&refer_page_sn=10045
removed the pins from the connector, reused them and added some heat shrink. 

 I made the lid thicker now, but I would print in a dark color if the leds may bug you. 

The holes are 2.5mm and I just ran some 3mm screws in with an impact.