Snapmaker Wire Clip
scott_gallagher409
AI找相似
打印配置(0)
模型文件(0)
0
1
0
发布时间:2026-06-02 14:33:18
0
0
010描述
模型来源
评论(0)
This should be printed on it side. I used ABS with 100% infill at 0.1 resolution for my print. The screw hole is 4.25mm in order to accept a 4mm screw. The clip can accept a wire that's up to 9mm thick.
Print Settings
Printer:
Snapmaker
Rafts:
No
Supports:
No
Resolution:
0.1mm
Infill:
100 %
Category: 3D Printer Parts模型来源
原设计地址: 点击查看
CC-BY