🖨️ Recommended print settings:

   🧱 Layer height: 0.2 mm

   💪 Infill: 15% - 25%

   🧲 Supports: Only if necessary

   🛏️ Bed adhesion: Not necessary, but if you have doubts, use brim or raft

   🌡️ Extruder temperature: 195 –205 °C (PLA)

   🔥 Bed temperature: 50–60 °C (PLA)

💬 ALL FILES ON MY PROFILE ARE FOR PAINTING, THEY ARE NOT OPTIMIZED TO BE MULTICOLOR
💬 If you have any doubts, don't hesitate to write to me!

❤️ Thank you for your support! Follow my profile to not miss any designs and discounts