Project: taiga.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 145.8x180mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 3mm and the Actual Depth is 2.2mm

Filaments Used:
PLA PolyTerra Army Blue Transmission Distance: 0.3
PLA BambuLab Basic Brown Transmission Distance: 2
PLA BambuLab Basic Orange Transmission Distance: 7
PLA BambuLab Basic Beige Transmission Distance: 8
PLA PolyLite White Transmission Distance: 5
This print uses 5 unique filaments

Swap Instructions:
Start with Army Blue
At layer #7 (0.64mm) swap to Brown
At layer #13 (1.12mm) swap to Orange
At layer #20 (1.68mm) swap to Beige
At layer #22 (1.84mm) swap to White for the rest.