Summary

I made adjustments to the original by Liquify_life to fit the hand mic on my Yaesu FT-212. It needed to be thinner for the hand mics I have. I also decided to shorten it, as I did not need the height, and found that I also did not need the back part for where I was putting it in the truck.

Modification was done in Blender, by moving the plane (inside of the bayonet) forward 1mm, taking it from 3mm to 2mm. I shortened it by moving vertexes. So any handmic that fit in the original should also fit in this version.

I printed using my Voxelab Aquila X1, PLA, 100% infill. I printed it with the back against the bed, and I also used standard supports at 15% density and 3mm line distance. I found this helped keep everything precise.