Project: .autosave.v0.7.3.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 150x150mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:
    PLA BambuLab Basic Black Transmission Distance: 0.6
    PLA PolyTerra Army Blue Transmission Distance: 0.3
    PLA BambuLab Basic Blue Transmission Distance: 4
    PLA BambuLab Basic Red Transmission Distance: 5
    PLA BambuLab Matte Lilac Purple Transmission Distance: 2
    PLA BambuLab Basic Yellow Transmission Distance: 6
    PLA BambuLab Matte Ivory White Transmission Distance: 4
This print uses 7 unique filaments

Swap Instructions:
    Start with Black
    At layer #6 (0.56mm) swap to Army Blue
    At layer #9 (0.8mm) swap to Blue
    At layer #12 (1.04mm) swap to Red
    At layer #20 (1.68mm) swap to Lilac Purple
    At layer #23 (1.92mm) swap to Yellow
    At layer #25 (2.08mm) swap to Ivory White for the rest.