This mount has a minimum amount of metal for the ED Fong DBJ-1 VHF/UHF antenna found on ebay. 2 are required for the antenna.

I designed it to mount on the side edge of the roof, and for any roof pitch. The mount is 3.5" in diameter so it will also fit on a standard 2X4, if the mount must be extended from the roof.

This mount was designed to fit "PVC-1120 SDR-21 PR200 PSI" 3/4" pipe which is specified in the inventors instructions.

I made mine using PLA and color matched it to the house.

FlashForge

Creator Pro

No

No

.17

15%

On my printer, each mount side takes about 2.5 hours to print.

123D