Savonius Wind Spinner
cind3rdoe
AI找相似
打印配置(0)
模型文件(0)
0
0
0
发布时间:2026-03-13 10:41:23
0
0
000描述
标签
模型来源
评论(0)
Print Settings
As it is for outdoor used i reccomend using PETG. I used a .4mm nozzle and did 3 walls for a 1.2mm wall thickness. I used a 10% infill on all parts. the only part that needs support is the Blades , not for the blades themselves but for the hole on the bottom where the bearing is inserted.
Additional Components Needed
Assembly
标签
模型来源
原设计地址: 点击查看
CC-BY