3D printable model of Lili from Tekken. I have uploaded 3 models, one with chains, without and one flipped. The flipped one is probably the easiest one to print. I recommend using Brim and Support Type Touching buildplate if you print that one. Downscaling might destroy the layers, so be careful with that. For the other two non-flipped models I recommend printing with support settings in Cura, my recommendation: Support; everwhere, overhang angle degree: 40 , fill amount: around 11-15 (lower is easier to peel off). I also recommend using Brim settings activated to make the support strucutre stable. Alternatively you can generate own support structure in Meshmixer. I recommend using Kapton tape or similar to make things easier with support structure.