Update 09.12.2023: Added a flat frame, to print the logo on the buildplate for better looking Surface finish. Replace the “Coaster Orange”-file with “Coaster Orange Flat” to get the Flat Version. Be aware that I'm not sure how well this works with the stand.

Coasterset Harley Davidson Style, made for multi material printing.

I made these a long time ago for a friend and finally decided to share them.

The base can hold up to 8 coasters. 

The Emblem is supposed to be glued to the base. Everything else is Multimaterial.

Be careful with the 3mf files, I made them now to the best of my knowledge, but didn't test them. I made the ones from the Fotos a few years ago and didn't save the projects.

Printing suggestions:

• You can print the emblem with a 0.4mm nozzle, but I suggest to use at least a 0.25 nozzle to bring out all the details, or at least set the extrusion width to 0.4.
• Everything else is fine to be printed with a 0.4mm nozzle.
• The base can be printed supportless as long as your printer is able to bridge those gaps.
• As it is right now, I don't think you can print this with a single-material printer. If you need changes to the design to make that possible, let me know what you need, I will try my best

If you have suggestions for improvements or find problems please let me know. 

I might make different themed versions of this in the future, for example Volvo, Ford or other car brands. Let me know if you would be interested in that.

Have fun!