Project: Cigarettes Kill.hfp
Print with a filling density of 100% and a layer height of 0.08 mm, and set the thickness of the bottom layer to 0.16 mm

The model size is 117.28×150mm.
On the premise that the minimum layer depth is not less than 0.48mm, you can choose a higher layer height for printing as needed.
The maximum layer depth is 2.2mm, and the actual layer depth is 2.3mm.

Consumables used:

PLA PolyLite Black, printable adaptation distance: 0.3
PLA BambuLab Basic Red, printable adaptation distance: 4
PLA BambuLab Basic Yellow, print adaptive distance: 6
PLA PolyLite white, printable adaptation distance: 5

A total of four different types of consumables were used for this printing.

Operation instructions for material replacement:

Initially, use black consumables
Switch to red consumables at the 8th layer
Switch to yellow consumables on the 13th layer
After the 20th layer