AT9S TX screen holder
tameyak
AI找相似
打印配置(0)
模型文件(0)
0
0
0
发布时间:2026-02-24 02:47:28
0
0
000描述
标签
模型来源
评论(0)
Hi,
I'm proud to present my version of RC Radio Transmiter (in my case RadioLink AT9S, but should also fit different models) screen holder. This model is obviously inspired by carbon+alminium available on chnese retailer shops, but it's almost fully 3D printable.
It was deigned to be used a screen holder for FPV drone flying and plan to attach the phone to the top plate via "velcro"/"hook&loop" fastner so I dodn't pay too much attention to the
Print Settings
Printer:
Anet A8
Resolution:
0,15
Infill:
50%
Notes:
You have to print the side plate and lock twice.
Once normal and once mirrored along Z Axis!
I set infill to 50% to make the parts more stable.
It's better to glue the side parts with top plate, althought my parts hold together quite stirdy without glue.
How I Designed This
Desingned in Onshape
Onshape is amaizing!
It took me three print+redisgn iterations to adujst the lock mechanism, the hight and top plate angle.
Custom Section
TODO
The top plate could be improved. I don't have a typical 7" screen, so I didn't now whay is the standard way of mounting it.
标签
模型来源
原设计地址: 点击查看
CC-BY