I really liked these PCB Standoffs but had an issue with needing a size in between the sizes offered. So I made my own customizable version.

Note:

CONST_Bases and CONST_Pillars are the number of bases or pillars you want in your STL as a grid

All measurements are in millimeters, please adjust accordingly.

Make sure the Pillar and Base Heights are what you want and that your PCB is the same thickness as the thickness measure

If you have trouble getting the pins into the base holes, increase DANGER_gap_Spacing by 0.1 and try again.

There are some variables labeled 'DANGER' I just recommend you actually read the code before you mess with them so you know exactly what you are doing.