Winchester Safe Keypad Mount
f0ggyrod
AI找相似
打印配置(0)
模型文件(0)
0
0
0
发布时间:2026-04-04 10:45:49
0
0
000描述
模型来源
评论(0)
The control panel was pried off the front of my Winchester safe in a break-in. Since the panel was originally screwed onto the front before the stick-on button pad was attached, there was no way to directly replace the screws. Instead, this adapter will attach to the front using a pair of countersunk M4 screws, and the panel clips onto the adapter plate.
Print Settings
Printer Brand:
Creality
Printer:
Ender 5
Rafts:
No
Supports:
No
Resolution:
0.20 mm
Infill:
20%
Filament: Gizmodorks Polycarbonate Black
Notes:
I used polycarbonate to ensure good strength on the tiny mounting clip tabs. Less durable filaments may work okay, but I didn't bother testing them.
模型来源
原设计地址: 点击查看
CC-BY