Rokenbok Action Sorter Chute
StephanieEaton6
AI找相似
打印配置(0)
模型文件(0)
0
0
0
发布时间:2025-12-02 11:52:16
0
0
000描述
标签
模型来源
评论(0)
This is a replacement for the Rokenbok Action Sorter chute piece that comes off the side of the sorter and has two chutes, one for Red Roks and one for Blue Roks. This isn't an exact replica of the original, the chutes do not have the bend at the end (seemed unnecessary and difficult to model) and some of the other supports are different, but this prints and works perfectly.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
Yes
Resolution:
0.1
Infill:
50%
Filament: Overture PLA Space Grey
Notes:
You could probably use 0.2 layer height for this, I chose 0.1 because it makes the chutes smoother, but it should be functional either way. Infill doesn't matter because generally the pieces are so thin that it's mostly walls anyway, so you can do 50%+ and it doesn't affect print time much. I used tree supports in Cura and they worked great.
标签
模型来源
原设计地址: 点击查看
CC-BY