Description

I like this approach to making a key holder, because I can install it with the light switches next to my exit door - very handy, and I don't have to put more holes in my wall.

 Notes :

• In the photos, you may a light switch guard cover; it is not part of this model, but you can find it here :

  • https://www.printables.com/model/230167-light-switch-guardcover/comments

• If you like this print, you may also be interested in this :

  • https://www.printables.com/model/1518952-hanger-tag-for-keychains

• The hooks are printed separability in order to enable printing for maximum strength; also, if a hook gets broken, it is easy to replace.

• There are basic models for 1-gang, 2-gang, and 3-gang switch plates.

• In addition to the three basic models, there is an extended "skirt" (Ext) version for each of the basic models with a bottom extension to help keep keys from scratching the wall (both versions for the 3-gang plate are shown in the photos)

Assembly and Use

Simply insert the hooks into the printed plate from the back side, and seat them firmly; then mount the plate over the switch(es).

Print Instructions

Print in PLA using the 3mf files provided ( used marble PLA), otherwise :

Plate :

• 0.2mm layer height

• 3 perimeters

• 20% grid infill

Hooks :

• 0.2mm layer height

• 4 perimeters

• no infill

CAD

The OnShape 3D CAD files for this are here :

 https://cad.onshape.com/documents/e9cd64f78697e5c32d00ef9e/w/e7e5c2a7fee06db94d6a5a79/e/3f06d8ce46d74c95279a9859?renderMode=0&uiState=694065ba4c2b12436d38c683