Wall mounted gravity fed wall feeder for chicks. Suitable for chick crumb, potentially chick starter pellets but I haven't tried with these. Approx 150mm high x 80mm wide x 40mm deep. Has a slight ‘anti-spill’ overhang on the inner tray area to reduce mess. 3 x screw holes to mount to a wooden surface, Comes with optional lid.

PRINT SETTINGS:  Print main body vertical. Supports required, however print at 5% density for ease of removal. 3 walls, 10% infill.  Print lid (optional) top down.

POST PRINT SUPPORT REMOVAL: Removing the supports is time consuming! Remember to remove the support layer around the inner rim (anti-spill overhang)