This is an E3D V6 mount that I designed for the Creality CR10. I found the other mounts a bit to wobbly for me so I decided to design something very compact, simple and sturdy. I have included supports that you will have to detach after printing. You will need 2 M3x10 (or M3x12) socket head screws (pan head will not fit!) and matching hex nuts.

You will lose some Z height with this mod and your nozzle will sit a fair bit lower than stock or other mounts. I thought that this was a fair trade off considering the large Z height of this printer.

EDIT 04-18-2017: I revised my initial design to make the parts stronger and easier to deal with. They also have better supports. Print with the flat back down. I uploaded one STL that contains both parts