Resin Tray
Marco Wilkerson
AI找相似
打印配置(0)
模型文件(0)
0
0
0
发布时间:2026-03-25 23:27:59
0
0
000描述
标签
模型来源
评论(0)
First test tray I have made using a Phrozen: Sonic Mighty 4k resin printer. Mistakes were made during and after the print process, but this is how we learn. Besides that, the features such as holes and tapered cuts came out well. Used Phrozen's Aqua Blue as the test, but any resin is suitable for use.
Taper is 45* starting from inside (rectangle is 10mm by 5 mm) and expanding to the outside. Circles are 5mm in diameter. Part has maximum dimensions of 84 x 100 x 150 mm.
Provided SCAD, STL, and OBJ files (non contain embossment on the front) with this model.
Print Settings
Printer Brand:
Phrozen
Printer:
Sonic Mighty 4K
Rafts:
Doesn't Matter
Supports:
Doesn't Matter
Notes:
Did not use any supports for this model. Did not use a raft underneath the model, but can be used to help remove the part from the plate.
How I Designed This
Features
Features such as the holes and tapered cuts were centered on the selected faces, patterned along the faces, then mirrored across the midplanes to transfer features onto opposing faces.
标签
模型来源
原设计地址: 点击查看
CC-BY