Adhesive Raspberry Pi Camera v2.1 mount (OpenSCAD)
JoshuaHolt
AI找相似
打印配置(0)
模型文件(0)
0
0
0
发布时间:2026-02-24 02:21:00
0
0
000描述
模型来源
评论(0)
Adhesive Raspberry Pi Camera v2.1 mount (OpenSCAD)
Author: Brian Khuu (2019)
This is a pressfit design. No support required. Just print and push the camera PCB to the mounting holes.
Apply adhesive strip
Default value assumes: Command Strip dimentions is typically 50mmx15mm
https://www.thingiverse.com/thing:3695202
Print instructions
Unassociated tags: 3d printer
Category: Electronics Summary
Adhesive Raspberry Pi Camera v2.1 mount (OpenSCAD)
Author: Brian Khuu (2019)
This is a pressfit design. No support required. Just print and push the camera PCB to the mounting holes.
Apply adhesive strip
Default value assumes: Command Strip dimentions is typically 50mmx15mm
模型来源
原设计地址: 点击查看
CC-BY