This is my attempt at making a minimal and modern wallet inspired by the Ridge Wallet. To put it together follow these instructions:
1) find an elastic material around 1/2 an inch wide and around 5-6inches in length depending on how stretchy the material is.
2) Sew the material to make a loop that fits snug around one of the inner wallet pieces
3) Find another piece around 1/2in wide and 2 inches in length and sew it to opposite sides of the loop, when the piece lays flat it should make a T shape.
3) Take the two inner pieces and line up the semi-circle cut out with the grooves facing outwards.
4) Put the piece of elastic around the 2 inner pieces. The elastic should fit into the grooves facing outwards.
5) Use super glue to glue the outer pieces onto either side to cover up the grooves.
6) Put a wide rubber band on the outside of the wallet to use as a cash strap

If you have any questions as to how to assemble this feel free to leave a comment or send me a message!

Anet

A8

Doesn't Matter

No

.2

85%

You will need to print:
1x inner ridge wallet.stl
1x inner ridge wallet - Copy.stl
2x outter ridge wallet.stl