Chico Bravo Stroller Light Mount / Bracket
Polly Yoon
AI找相似
打印配置(0)
模型文件(0)
0
0
0
发布时间:2026-01-03 21:59:16
0
0
000描述
模型来源
评论(0)
This is a bracket designed to attach some 200-lumen flashlights I picked up at Costco in a three pack for $15 some time ago. Any flashlight with a diameter of ~28mm (1 1/8") should work fine.
The rectangular slots on the sides are for two zip ties to hold the bracket on to the stroller (I recommend attaching it to the front KeyFit bar) and two more zip ties to hold the flashlights in place.
I modeled this in Fusion 360 and you can find the source file at http://a360.co/2jafy3i.
Print Settings
Printer:
Maker's Tool Works MiniMax
Rafts:
No
Supports:
No
Resolution:
0.3mm / layer
Infill:
10%
Notes:
I printed this in Solutech 3D white PLA at 230C with 2 perimeters / shells. It took about 2.5 hours. Bed was treated with Garnier Fructis Style Full Control (Hold 4).
Poorly, and with four attempts.
Category: Other模型来源
原设计地址: 点击查看
CC-BY