Bresser Pluto 114/500 Telescope RaspberryPi Zero Camera Adaptor
Mirvov33
AI找相似
打印配置(0)
模型文件(0)
0
0
0
发布时间:2026-02-17 18:31:24
0
0
000描述
标签
模型来源
评论(0)
A simple Raspberry Pi Camera adaptor for the Bresser 114/500 Telescope.
What will you need?
- Raspberry Pi Zero
- Raspberry Pi camera module (with 15cm ribbon cable)
- 4x M2,5 Screws
- 4x M2,5 Nuts
- 3x M3 Screws
- 3x M3 Nuts
- 3x M3 square Nuts
- 2x (or 4) 1.5mm Screws for the Raspberry Pi Camera Module
Pro Tip: deactivate the cameras module led.
You have to print the body one time and the bolts three times.
Print Settings
Printer:
Prusa Mini+
Rafts:
Doesn't Matter
Supports:
No
Infill:
15%
Filament: BASF Ultrafuse PLA Grey
Notes:
Prusa Mini+
标签
模型来源
原设计地址: 点击查看
CC-BY