Solar Finder
Thornimay
AI找相似
打印配置(0)
模型文件(0)
0
0
0
发布时间:2026-01-30 05:08:03
0
0
000描述
标签
模型来源
评论(0)
Yet another project inspired by a Jerry Oltion article from Sky & Telescope, March, 2024, p. 72. Mount this on your scope, align with the sun, and mark the location of the spot on the screen. The design consists of two 3D printed parts:
Solar finder body with integrated Vixen-style dovetail
Rear screen
The body is printed in black PLA and the screen in white PLA.
If the spot is too small for your liking, you can drill it out to make it larger.
Print Settings
Printer Brand:
Creality
Printer:
CR-10S
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
20%
Filament: Inland PLA+ Black/White
Notes:
The screen is 0.4mm thick. Print this at 0.2mm vertical resolution. The body can be printed at 0.24 or higher.
标签
模型来源
原设计地址: 点击查看
CC-BY-SA