Pole Holder Base V3
barbara
AI找相似
打印配置(0)
模型文件(0)
0
0
0
发布时间:2026-01-04 05:03:33
0
0
000描述
标签
模型来源
评论(0)
Mimicked a Walmart kayak attachment. Currently 2 hours into my v5 of print settings but seems to be doing fine with the famous struggle ABS. This is my first print with my upgraded brass extruder wheel.
Print Settings
Printer Brand:
FlashForge
Printer:
Adventurer 3
Rafts:
Yes
Supports:
Yes
Resolution:
.4mm layer
Infill:
15
Filament: SUNLU ABS Black
Notes:
ABS so I've been warned, is tricky. After testing and setting finding, I found!
As an extension of the default settings, adjustments are below:
250c extruder temp - 100c bed temp
retract length 5.8mm
Slowed first 3 layers max 30mm/s
Decreased both the interior and ext. visible speed by 10%
4 shells - 5 top 4 bottom solid layers
raft = default
used shrinkage setting at 3% both x/y and 5% in z
also like to used the setting of z height adjust at .2mm
let me know how you do, and what you get!
标签
模型来源
原设计地址: 点击查看
CC-BY