The Buggy is mounted on the remixed Bobble Head spring.  The base has recesses for four 6 mm x 3 mm magnets that will fix the assembly to any steel surface.   Replacements for the missing portions of the tires are provided that can be glued to the tire flats.

If the magnets are facing up, glue is not needed.   If you don't need the magnets, have the four magnet holes face down.  Or glue them into the base and face base down.

The spring retains the Buggy by snapping onto the Buggy running boards.

The “Buggy attitude” (level) can be adjusted by moving the buggy fore and aft on the spring, i.e., you can have the Buggy face sky, ground, or horizon by changing the center of gravity fore and aft over the spring.

A separate set of files provides only the tire bottoms if that is all you need.  The tire bottoms are also included in the basic files.

Purchased from Amazon:

    DIYMAG, magnets 200 pcs, Refrigerator Magnets, 6 x 3 mm, $11.85 ($.06/each)

    Glue:  Locktite, No drip super glue, $3.36 or Riverruns UV Clear Glue with UV light for curing.