This is a Cyborg Dragon body for our Smartibot kit because I wanted to beat Elon Musk to market.

The dragon uses the circuit board, battery box, two motors, one of the marbles and some of the fixings.

You can get your Smartibot kit here:
https://www.kickstarter.com/projects/460355237/smartibot-the-worlds-first-ai-enabled-cardboard-ro/faqs

Ultimaker

Ultimaker 2

No

No

0.4mm nozzle 0.15mm layer height

15%

The board is held in with some self-adhesive pads rather than bolts. The motors are held in with the same bolts as are used in the cardboard robots in the kit. The flap is held on with two small self-tapping screws.