remix of https://www.thingiverse.com/thing:4734896

(Other parts can also be found here)

4 walls min

top/bottom 3mm

infill gyroid / grid

supports bottom only

known materials minimum petg

ideally abs , polycarb, petgcf , pa6

support stock probe ensure this is square to the nozzle

recommended probe (nozzle direct)

probe wire clips https://www.thingiverse.com/thing:5940041

https://www.amazon.ca/Printer-Precision-Z-Probe-Leveling-nozzles/dp/B07V6GR72Q/ref=sr_1_1?crid=1GJ19Z1ONVGZA&keywords=kossel+probe&qid=1680402296&sprefix=kossel+prob%2Caps%2C371&sr=8-1

Top cutout is for adxl

balls simply push in may need to use a screw driver to slightly adjust hole

optional loctight blue on ball stems

4010 fans screws or super glue / contact cement either will work

Hotend mount either screws and, bolts or B 3mm brass inserts x2

Note holes will need a small adjustment for inserts

https://www.amazon.ca/AIEX-Printing-Embedment-Automotive-4-6x5-7mm/dp/B09TNK8GD6/ref=sr_1_7?crid=2KFGBJKCTQLM5&keywords=brass+insert&qid=1680402853&sprefix=brass+inser%2Caps%2C247&sr=8-7

current ducts wip

if needed to adjust size simply lower a bit below build plate in slicer or "plane cut"

individual duct.stl if used multiply it in slicer and, mirror.

/

Category: 3D Printing