Gear keepers
XANERYN
AI找相似
打印配置(0)
模型文件(0)
0
0
0
发布时间:2026-03-11 10:43:35
0
0
000描述
标签
模型来源
评论(0)
Gear keepers, press fit.
Use the stoppers_large.stl (x2) for the large gears and the stoppers_small.stl (x1) for the small gear.
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK3
Rafts:
No
Supports:
No
Resolution:
0.15
Infill:
20%
Filament: X3D PLA Red
Notes:
Print the gears from https://www.thingiverse.com/thing:1702713rnrn- 3gears03_box.STL or 3gears03_box_w_ring.STL x 1rn- 3gears03_g1.STL x 1rn- 3gears03_g2.STL x 1rn- 3gears03_g3.STL x 1rnrnPrint the gear keepers (aka stoppers):rnrn- stoppers_large.stl x 2rn- stoppers_small.stl x 1rnrnAssemble the gears on the box, add the stoppers to prevent the gears from falling off. The stoppers are press-fit so they should stay in place. Use glue if the are not tight enough.rn
标签
模型来源
原设计地址: 点击查看
CC-BY