Threaded Grommet
rebecca2010
AI找相似
打印配置(0)
模型文件(0)
0
0
0
发布时间:2023-07-18 23:39:51
0
0
000描述
模型来源
评论(0)
Summary
I couldn't find the right grommet that I needed for a plastic sheet, so here is what I came up with. I used PETG at high resolution without supports. Punch a small 3/4 to 7/8 inch hole in the plastic first. I used a DIY spanner (see pic) to tighten the two halves. Works vey well.
Print Settings
Printer Brand:
MakerGear
Printer:
MakerGear M2
Rafts:
No
Supports:
No
Resolution:
high
Infill:
75%
模型来源
原设计地址: 点击查看
CC BY