Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

 The Model is 150.06x266.03mm in size

 You may print at higher layer heights below the Min Depth of 0.48mm

 The Max Depth is 2mm and the Actual Depth is 2mm

Filaments Used:

PLA Generic Black Transmission Distance: 0.3

PLA Generic Jade White Transmission Distance: 5

PLA Generic Orange Transmission Distance: 5

This print uses 3 unique filaments

Swap Instructions:

Start with Black

At layer #6 (0.56mm) swap to Jade White

At layer #14 (1.2mm) swap to Orange for the rest.