This is a modification of the original Comma.AI 3X windshield mount, designed to make mounting and removing the Comma 3X from the windshield easier.

• The base has been extended for better adhesion to the windshield.  It also provides a little bit of runway for you to slide the comma into place.
• The holes on the back of the mount have been removed, since these were only necessary for plastic injection molding, and are unnecessary for 3D printed parts.
• The center column has been extended slightly, making it easier to find the proper placement for where the Comma should slide into the mount.
•  .3mm of material has been removed from the left and right grabber edges to make the comma not quite as tight and easier to pull off.
• The edges where the comma gets inserted are made somewhat pointed, making it easier to slide the comma in.

You will want to print this standing at the angle it is provided at, with supports, with 100% density, in preferably ASA material, ABS should also work.  PLA and PETG will deform on even mildly sunny days.

The reliability of the mount is very important for the comma so don't use a knockoff adhesive - use genuine 3M VHB tape to adhere the mount.

Use of this mount is at your own risk.