Summary

Computer motherboard wall mounts, Should fit most motherboards. there is 2 sizes depending on how much room you have on your motherboard to work with. some spots may need shorter mounts then other spots depending on solder points, capacitors and other obstacles that may be on your board.

I originally built this for my streaming computer so that I didn't have to have 2 computer cases sitting next to each other. (BustinSlugz @ facebook stop by and give a like and follow :)

BEFORE you try and hang your computer you need to lay it on a cardboard or cloth surface and pre-plan the arrangement of your computer components on to the wall so that you know all your wires and cables will reach designated spots. If you don't do this you may end up drilling more holes in your wall then you'd like.

I printed these at 20% infill and and either 0.3mm or 0.4mm between layers has worked fine for me. I will be adding some additional parts when i get the time for cable management, GPU's, middle of board support and other things that come to mind as I progress this.

The mounts are made to use common dry wall screws. 4-5+ mounts should be more then good for securing your board but make as many for your board that makes you feel comfortable with it being secured.