WLED Desk lamp
RowanHive
AI找相似
打印配置(0)
模型文件(0)
1
0
0
发布时间:2026-01-27 12:54:53
0
0
100描述
标签
模型来源
评论(0)
I've seen a project like this in a Facebook group, and thought I need to do it on my own :) So I designed the lamp, and used other resources from @Aircoookie on GitHub: https://github.com/Aircoookie/WLED
Things you need for the project:
- 345g semi-transparent filament
- 1pcs Wemos D1 mini
- 1pcs 1000uF capacitor
- 1pcs 5V ~3A power supply
- 80cm WS2812B or similar LED (see on GitHub)
Total cost from Aliexpress is ~20€ only!
Total size is 230x140mm.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
Yes
Resolution:
0.2
Infill:
10%
Filament: Sunlu PLA+ White
Notes:
10mm/s initial layer speed, 60mm/s at the others. Used Arc Welder plugin for Cura 4.8 and Marlin 2.0.7.2 on SKR mini E3 v1.2 with G2 G3 (arc) enabled to get probably smoother curves.
The inner side could be screwed in the outer side, but somehow the thread is too tight yet. I'll try to rework them to fit better, because then the infill at the bottom would be invisible. Probably printing the inner side at 95-98% scale could solve the issue.Outer:
- 0,4mm nozzle
- 16mm Brim
- 10% infill and support blocker in the first 20mm
- Tree support and 100% infill in the rest
- 238g filament in 28h22m
Inner:
- 0,4mm nozzle
- 16mm Brim
- 10% infill
- support where touching buildplate only, not in the thread
- 104g filament in 13h35m
Clips:
- 0,4mm
- 25% infill
- 6pcs, 3g filament in 31m
标签
模型来源
原设计地址: 点击查看
CC-BY