A simple case for the Raspberry Pi 4.

I wanted a case that I could easily modify to accommodate a hat or small LCD display.

Features

• Well ventilated to handle the high temperatures that the RPi 4 can generate
• Compact - I wanted the footprint to be as small as possible

• All external ports easily accessible - generous cutouts so that connectors can easily fit.
  Possible future enhancements

• Cutouts for GPIO & Camera connectors
  Notes

• Requires the following hardware (4 of each):

  1. M2.5* 6mm countersunk screws
     1. M2.5* 10mm countersunk screws
     2. M2.5* 20mm standoffs

• The upper and lower case parts were designed to fit tightly together. The parts I printed will snap together and hold without any screws. You may need some patience to get it to fit.

• Slicer settings used: 0.2mm, 0 top and bottom layers, 20% infill with honeycomb fill
• New version of Upper Case has a cutout for LED indicators.
• Update to V37 with smaller cutouts for USB, HDMI and audio connectors.

Print instructions

Category: Computer Print Settings

Printer Brand: Prusa

Printer: i3 MK3

Rafts: No

Supports: No

Resolution: 0.2mm

Infill: 20%

Filament: eSun PETG