Parametric Pegboard Drill Bit Holder
blueshield3
AI找相似
打印配置(0)
模型文件(0)
1
1
0
发布时间:2025-12-31 07:11:33
1
0
110描述
标签
模型来源
评论(0)
Customizable drill bit holder. Enter the fractions (of an inch) for your bits, and how many rows you want, the rest is automatically generated. Slots on the back let you optionally attach to the included pegboard clips.
The clips are a modification of this thing: https://www.thingiverse.com/thing:1540038
Those were too tight for my 1/4" holes 1" on center pegboard. I slightly modified them and now I get a satisfying snap as they click into place. They come easily using pliers, and don't damage the holes.
Print Settings
Printer Brand:
Creality
Printer:
Ender 5
Rafts:
No
Supports:
No
Resolution:
0.16
Infill:
10
Filament:
Hatchbox PLA
Notes:
Print with the slats on the bed and the labels facing up. Need a relatively fine resolution (I use 0.16) as the holes need to be precise. This is a long print, as each layer will have a number of circles to make.
The slots are spaced every 1", you don't need to use all of them. The outer two will be fine, but you have flexibility.10% infill is plenty,
How I Designed This
Download OpenSCAD (http://openscad.org) and use it to open the included drill_bit_block.scad file.
Modify the variables at the top.
Render the model. This will be slow. Make sure everything looks good, including the slats on the back.
If everything looks good, export the STL and you're good to go!
标签
模型来源
原设计地址: 点击查看
CC-BY