A printed cable guide to the existing lidar cable for stress relief on the cable.

Requirements: 

• Removing the extruder motor cover 
• 1xM3x8 or M3x10 for mounting into existing extruder motor mounts.
   

--------------------------------------------------------------------------------------------------------

How to get some extra cable:

1. Unplug the lidar sensor from the hotend motherboard.
2. Flip the printer around and cut the cabletie holding the lidar cable.
3. The cable can now (with a bit of force) be pulled out revealing a few extra centimeters of cable.

Does it work without the lidar cable?

• Yes, it still works without the cable from the lidar - the included USB cable from the cartographer can still be used.

Link to install guide: