RC Carbon Cub
GoldenYard22
AI找相似
打印配置(0)
模型文件(0)
0
0
0
发布时间:2025-12-12 15:59:02
11
0
000描述
标签
模型来源
评论(0)
To design a 3d printable rc plane was a challenge I had put to myself. What better choice than my personal favorite bush plane?
Wingspan 1m, neutral point is around 55mm from LE.
I'm using a Sunnysky x2216 1200kv motor (mounting holes 16x19), 8x6 prop, 1300 3S, and 25A ESC
There are two options for the wing. Either an 8mm spar 800mm long can be used, or one thats 120mm along with filament strings connected to the fuse with lugs.
RTF weight with battery as tested is 685gm.
Would suggest printing all parts aft of the wing at 90% flow
Will upload flight video soon
STEP on grabcad/library/rc-carbon-cub-1
Print Settings
Printer:
FLSUN Kossel
Rafts:
No
Supports:
No
Resolution:
0.2-0.24
Infill:
100
Filament:
- PLA
Notes:
For all parts,
1 wall line
1 top/bottom layer
Most of the model won't be affected to infill settings. Do ensure though to print Fuselage 2, and Wing 2s with 100% infill to strengthen the places where screws are screwed lol.
Fuselage 1 (would recommend printing out of ABS or reinforcing with cyano) needs supports for the air intakes.
Might want to use a brim on thin parts like the ailerons
标签
模型来源
原设计地址: 点击查看
CC-BY