This is a fridge magnet with a captured dial that can be used to keep count of anything you want to track.  Print two to cover 0-99, etc.

There are two versions.  One large one that takes a 1/2" x 1/8" magnet and a smaller one that takes a 10mm x 3mm magnet.

The gcode includes two color changes.  Start with primary color.  First change is for the weave and text color.  Second is the face color around the text (typically same as primary color).

I recommend the following print setting overrides:

1. Set elephant foot compensation to zero (Print Settings→Advanced).
2. Increase bridge flow ratio in the same menu to 1.5
3. Force bridging angle to 180 degrees (Print Settings→Infill)

There is a similar model configure for days of the week here:

https://www.printables.com/model/216166-weekday-pill-etc-reminder