GoPro mount on 3d printer frame
plaidroam
AI找相似
打印配置(0)
模型文件(0)
0
0
0
发布时间:2026-01-10 19:55:34
0
0
000描述
模型来源
评论(0)
If you want to mount your gopro or other type of action cam with a gopro mount to your 3D printer frame for some timelapse video, then this is the mount you should choose.
There are currently 2 versions, straight version and a round version with 45 degree tilt.
What you need:
A set of thumb screw.
2 M3 bolts/screws and a holding nut.
Feel free to visit my github repo for more design. I use FreeCAD for designing so you should get the original design and do changes easily. https://github.com/t-liu93/Home-Improvement-Mechanical-Design
Print Settings
Printer Brand:
Creality
Printer:
Ender 5
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
50%
Filament: DevilDesign PETG Transprant
Notes:
You can use PLA for that but if your printer is in a closure and you are printing ABS or PETG with very high bed temperature, then choose a more heat resistant material.
I used 50% infill but I think less should also work.模型来源
原设计地址: 点击查看
CC-BY