Summary

Project: gokumitad.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.1mm

The Model is 134.6x200mm in size
You may print at higher layer heights below the Min Depth of 0.5mm
The Max Depth is 2.3mm and the Actual Depth is 1.7mm

Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA BambuLab Basic Blue Transmission Distance: 4
PLA BambuLab Basic Red Transmission Distance: 3.9
PLA BambuLab Matte Ivory White Transmission Distance: 3.5
This print uses 4 unique filaments

Swap Instructions:
Start with Black
At layer #8 (0.66mm) swap to Blue
At layer #9 (0.74mm) swap to Red
At layer #14 (1.14mm) swap to Ivory White for the rest.