Mounts for Sv07/+ accelerometer to make changing its location easier and faster.

Tips and info

• Both mounts use the same locations and orientations as they would without the box.
• would recommend printing the “BOTH” file and printing the other 2 if one happens to break
• for "XAxisAccelerometerMountForSV07PLUS" and  "YAxisAccelerometerMountForSV07PLUS", you may need to scale them to mm (or 2540% in scale)
• You will need 2 16mm m3 screws (accelerometer comes with 1).
• Any type of screw head will work as long as diameter is 6>/= and it is flat.

(Use CodeFuPanda’s remix to avoid carriage running into z axis mount. Thanks CodeFuPanda!)

Print settings:

• 3 walls
• 100% infill (you are squeezing the mounts very tightly to keep them secure so you want a very strong part)
• normal orientation
• support enabled (for X axis mount)
• brim enabled if you have bad bed adhesion

Happy printing!

*note: x axis mount makes the Gergo 3d dust cover for the x axis not be able to sit on the x axis so if you use that, I would advise just printing the Y axis mount