R1 Initial Release
This is a FlightAware ADS-B Ground Station using a Raspberry Pi Zero W, PiAware software and an FlightAware ADS-B USB receiver.

May be mounted vertically by drilling out the two internal mounting holes.

Parts required

1 - Raspberry Pi Zero W or WH with power supply.
1 - FlightAware Pro Stick Plus ADS-B USB Receiver (with or without built in filter) + MicroSD with PiAware reloaded. (Amazon)
1 - Micro USB (male) to USB 2.0 (Female) OTG cable Amazon
1 - External ADS-B antenna - Multiple options are available on Amazon.
4 - M2.5x5 socket head screws
4 - M3x10 socket head screws

Links: FlightAware - Build your own ADS-B Ground Station.

Prusa

I3 MK3S

Doesn't Matter

No

.3mm

15%