New Additions (v2.1) - See below for details

Floating wall shelf

I have updated the floating shelf to version 2 based on suggestions in the comments.

• Wall mount posts are rectangle and the same width as the width of the bracket bottom
• Printing on the side instead of upright increases the strength of the posts

Dimentions
15mm x 90mm x 70mm
15mm x 90mm x 180mm
15mm x 90mm x 120mm

See "Support" below for direct download to avoid Tip PopUp window

If you would like this in a larger size, please let me know, I am happy to help.

More Designs Here:
https://www.thingiverse.com/davidgunzenhauser/designs

Parts:

V2.1
1) v2.1-Floating Shelf 120 - Shelf
2) v2.1-Floating Shelf 120 - Shelf Rounded
3) v2.1-Floating Shelf 120 - Bracket

With this version I have added a new size, and an option for rounded corners.
Note, the bracket will work for both of the v2.1 prints

v2
1) Floating-Shelf V2
2) Floating-Shelf V2-Wall Mount
3) Floating-Shelf V2 180mm wide
4) Floating-Shelf V2 Wall Mount 180mm wide

v1
1) FloatingShelf.stl
This is the actual shelf. It simply slides onto the wall mount. No screws necessary
2) FloatingShelf.wallmount.stl
This is the wall mount for the shelf. This will be mounted to the wall and the shelf will slide on

2 Screws are required 3.5mm x 30mm
2 wall mount anchors for screws

Rafts:
No

Supports:
No

Printer:
Ender 3 V2

Infill:
15% for Shelf
100% for wall mount - It is not necessary but will provide extra strength. The sample is printed at 15% and works just fine

Filament brand:
TINMORRY

Filament color:
White

Filament material:
PLA

You can download the zip file here to avoid the tip popup window:
https://www.thingiverse.com/thing:5217638/zip

If you like my work and would like to support me, please consider making a donation using the link below (it would really help me a lot!!):

https://bit.ly/3rIxyXn
Or click on the "tip designer" button above