Summary

Are you tired of buying expensive toys for your bathtub, pool, or collection of things that float. We have you covered here at Makersome. With this easy print item you will be getting nautical in no time. Never worry about losing the Torpedo to the deep because another copy is just a push of the button away.

Instructions:

1. Download the STL file for the Torpedo
2. Pop it into your slicer of choice
3. We recommend using PLA with extruder setting of 200°C or ABS at 230°C. A layer height of .2 (or medium resolution) and 20% infill so it floats.
4. If you do not have a Glass Bed we recommend not to use a heated bed, but if you do have the Glass Bed Upgrade Kit then we recommend using a bed temp of 70°C
5. Use rafting and supports while printing this project
6. Load your project onto an SD card or connect your computer to your printer (just use your preferred method here)
   Congratulations, you’re ready to print!

For more 3D printing projects check out..

Our 3D printing projects page at:
http://makersome.com/3d-printing-projects/

Our YouTube channel at:
https://www.youtube.com/channel/UCv00IAervOUnsipGhwTC9rA/feed

And remember to Like, Comment, and Share if you like what you see.