This is a fun, and super cool fidget that I hope you enjoy. It can be printed without assembly. Below are a few tips for 3D printing, to successfully allow it to be printed without pauses or assembly.

1. You must print in an upwards orientation. Essentially, the switch must be pointing to the sky, if not the switch will not move. 
2. Do not reduce the scale, this will lower clearances, and this might change the output. In some cases, it may cause the fidget to not move at all. For example, if you put this object to 25% scale, the clearance that once may have been 0.5mm is now 0.125mm, which is too precise for most FDM 3D printers.
3. Please print with supports! 
4. Do not print this with flexible materials. I recommend simply using PLA for this.
5. In some cases, you may want to use a utility knife, or needle nose pliers to remove support material. Please utilize tools for support removal when possible.  

With those tips you should be able to successfully 3D print this object without encountering any issues. These models are from Cooper Create, discover more from Cooper Create at Cooper-Create.com. 

Any questions, comments, or concerns?? Email Cooper Create using coopercreate7@gmail.com 

Finally, this is a part of Elegoo's 1 Million dollar creator fund, feel free to get started at Elegoo.com.